Design prosty, ale atrakcyjny, produkt praktyczny.
VICTOR SPE-8100 Portable Stereo Record Player
Product Details
VICTOR SPE-8100 Portable Stereo Record Player with Built-in Amplifier using two 50EH5 vacuum tubes
γ» Confirmed operation with LP records (33 1/3 rpm) and EP records (45 rpm).
γ» SP records (78 rpm) have not been played, and the needle appears to be in like-new condition.
γ» There are some scratches and dirt on the exterior.
γ» The worn-out turntable mat has been replaced with a rubber one.
γ» The volume control (500KΞ© B curve) which had crackling noise has been replaced.
However, since a B curve was unavailable, an A curve has been used.
γ» The rating is displayed as 50,60 [c/s], but it is believed to be designed to achieve the specified rotation speed at a power frequency of 55Hz. At 60Hz, the pitch appears to be slightly higher by a semitone. Therefore, at 50Hz, the pitch is likely to be slightly lower by a semitone. For reference, the results of rotation speed measurements are shown below.
γ» Due to the transformerless power supply design, most of the wiring inside, including the ground, is live. There is a risk of electric shock from the internal metal parts. Please be careful not to touch them.
That's all!
Daily Cleaning: Use a soft brush or damp cloth to gently wipe away dirt. Avoid harsh chemicals. For mesh areas, use diluted mild detergent and a soft brush.
Drying: Air dry in a cool, shaded place after cleaning. Avoid direct sunlight or high heat, which can cause fading and glue deterioration.
Storage: Stuff with paper to maintain shape when not in use. Store in a dry, ventilated area to prevent mold. Rotate between multiple pairs to extend lifespan.
Usage Notes: Designed for basketball. Not recommended for hiking, long-distance running, or other specialized sports where different performance features are required.








